User manual

25D-Link EBR-2310 User Manual
Section 3 - Configuration
MTU:
Clone MAC
Address:
Maximum Transmission Unit - you may need to change the MTU for optimal performance with your specific ISP. 1400 is the
default MTU.
The default MAC Address is set to the Internet port’s physical interface MAC address on the Broadband Router. It is not
recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s
MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card.
Enter the IP address of the login server.
Enter your BigPond username.
Enter your BigPond password and then retype the password in
the next box.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
Maximum Transmission Unit - you may need to change the MTU
for optimal performance with your specific ISP. 1500 is the default
MTU.
The default MAC Address is set to the Internet’s physical interface
MAC address on the Broadband Router. It is not recommended
that you change the default MAC address unless required by your
ISP. You can use the Clone Your PC’s MAC Address button to
replace the Internet port’s MAC address with the MAC address
of your Ethernet card.
BigPond Server:
BigPond Username:
BigPond Password:
DNS Servers:
MTU:
MAC Address:
Internet Setup
Big Pond