User manual
50D-Link DVS-310-1 User Manual
Section 4 - Security
Run the Setup Wizard program from the CD included with the DVS-310-1. Follow the steps in the Quick Installation
Guide to congure the DVS-310-1. The Video Encoder will be assigned a local IP Address that allows it to be
recognized by the router. Write down this IP Address for future reference.
1. Assign a Local IP Address to Your Video Encoder
After you have completed the setup of the DVS-310-1 outlined in the Quick Installation Guide you will have an
operating Video Encoder that has an assigned IP Address. When you use a router to share the Internet with
one or more PCs, the IP Address assigned to the Video Encoder will be a local IP Address. This allows viewing
within your Local Area Network (LAN). Later, the router can eventually be congured to allow remote viewing
of video over the Internet.
This is the IP Address assigned to your Video Encoder (192.168.0.120 is only an example). You will probably have a
different IP Address.