User manual
22D-Link DVS-310-1 User Manual
Network Setup
LAN Settings:
DHCP:
Static IP
Address:
IP Address:
Subnet Mask:
Default Gateway:
Primary DNS:
Secondary DNS:
Enable UPnP:
Enable UPnP
Port Forwarding:
Settings for your local area network.
Select this connection if you have a DHCP server running on your
network and would like your Video Encoder to obtain an IP address
automatically.
You may obtain a static or xed IP address and other network
information from your network administrator for your Video Encoder.
A static IP address may simplify access to your Video Encoder in
the future.
Enter the xed IP address in this eld.
This number is used to determine if the destination is in the same
subnet. The default value is 255.255.255.0.
The gateway used to forward frames to destinations in a different
subnet. Invalid gateway settings may cause the failure of
transmissions to a different subnet.
The primary domain name server translates names to IP addresses.
The secondary DNS acts as a backup to the primary DNS.
Enabling this setting allows your Video Encoder to be congured as
a UPnP device on your network.
Enabling this setting allows the Video Encoder to add port forwarding entries into the router automatically on a UPnP
capable network.
Use this section to congure the network connections for your Video Encoder. All relevant information must be entered accurately.