User manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
Creating 3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, then prior to
creating a 3G WAN connection, proceed to the USB modem menu and enter the PIN code on the
page displayed (see the USB Modem section, page 85).
Figure 23. The page for creating a new connection. The General settings and Physical layer sections.
Parameter Description
General settings
Name
A name for connection for easier identification.
Connection Type Select the 3G value.
Enable Select the checkbox to enable the connection.
Direction The direction of this connection.
Physical layer
Physical interface Select the usb value.
Page 31 of 110