User manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Configuring via Web-based Interface
Parameter Description
General settings
Name A name for this connection.
Connection Type The type of network protocol used by this connection – IPoE.
Enable The checkbox enabling this connection.
Direction
The direction of this connection.
Physical layer
Physical interface The physical interface to which this connection is assigned – br0.
IP settings
IP Address
The router's IP address. By default, the following value is specified:
192.168.1.1.
Netmask
The subnet mask. By default, the following value is specified:
255.255.255.0.
Interface
The name assigned to the connection by the system.
When all needed settings are configured, click the Save button.
On the DHCP server tab, you can configure the built-in DHCP sever of the router.
Figure 21. The tab for configuring the DHCP server.
Page 28 of 110