User manual

DSL-2750U 3G/ADSL/Ethernet Router with
Wi-Fi and Built-in Switch
User Manual
Installation and Connection
Configuring Wi-Fi Adapter
1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. Select the icon of the wireless connection and make sure that your Wi-Fi adapter is on.
Figure 6. The Network Connections window.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window select the needed wireless
network (DSL_2750) and click the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial configuration of the router via Wi-Fi connection, note that
immediately after changing the wireless default settings you will need to reconfigure the
wireless connection using the newly specified settings.
Page 16 of 110