User manual

DSL-2750E User Manual

The following table describes the parameters of this page.

Field Description

Generate PIN

Press the button to generate a pin used by the AP

and the station.

PIN Station Press the button to connect the station with the pin.

WPS Session

Status

Display the session status.

3.3.2 Port Forwarding

This function is used to open ports in your device and re-direct data through

those ports to a single PC on your network (WAN-to-LAN traffic). It allows remote

users to access services on your LAN, such as FTP for file transfers or SMTP

and POP3 for e-mail. The device accepts remote requests for these services at

your global IP address. It uses the specified TCP or UDP protocol and port

number, and redirects these requests to the server on your LAN with the LAN IP

address you specify. Note that the specified private IP address must be within the

available range of the subnet where the device is in.

Choose ADVANCED > Port Forwarding. The page shown in the following figure

appears.