User guide
87DSL-2750B User Guide
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address
from the DHCP server on your Gateway automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start
Search box.)
At the prompt, type ipconfig and press
Enter.
This will display the IP address, subnet mask,
and the default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the
settings on your router. Some firewall
software programs may block a DHCP
request on newly installed adapters.
If you are connecting to a wireless network
at a hotspot (e.g. hotel, coee shop, airport), please contact an employee or administrator to verify their wireless
network settings.