User manual

Section 3 – Configuration
D-Link DSL-2740R User Manual
50
Save/Restore Settings
To access the Save/Restore Settings window, click the Save/Restore Settings button in the Maintenance directory.
Once you have configured the Router to your satisfaction, it is a good
idea to back up the configuration file to your computer. To save the
current configuration settings to your computer, click the Save button.
You will be prompted to select a location on your computer to put the
file. The file type is bin and may be named anything you wish.
To load a previously saved configuration file, click the Browse button
and locate the file on your computer. Click the Upload Settings button
to load the settings from your local hard drive. Confirm that you want to
load the file when prompted. The Router will reboot and begin
operating with the configuration settings that have just been loaded.
To reset the Router to its factory default settings, click the Restore
Device button. You will be prompted to confirm your decision to reset
the Router. The Router will reboot with the factory default settings
including IP settings (192.168.1.1) and Administrator password
(
admin
)
.