User manual

Section 3 – Configuration

D-Link DSL-2740R User Manual

SETUP WIZARD – SELECT THE INTERNET CONNECTION TYPE

Now use the drop-down menus to select the Country, ISP Provider, and

Connection Type used for the Internet connection, and enter VPI and

VCI values if applicable. Your ISP has given this information to you—any

information that is not required for your provider will automatically be

grayed out in this window and subsequent Setup Wizard windows.

The Connection Type options are 1483 Bridged IP LLC, 1483 Bridged I

VC-Mux, 1483 Routed IP LLC, 1483 Routed IP VC-Mux, PPPoE LLC,

PPPoE VC-Mux, PPPoA LLC, and PPPoA VC-Mux.

Click the Next button when you are finished to proceed to the next Setup

Wizard window.

SETUP WIZARD – SELECT THE INTERNET CONNECTION TYPE

If the following Setup Wizard window appears, please select the

connection type used by your ISP and then click the Next button. Most

users, however, will be sent directly to a Setup Wizard window for their

specific Internet connection type based on the information entered in the

previous Setup Wizard window.