Specifications
15D-Link DSL-2740R
Section 2 - Installation
Information you will need about your LAN or computer
Ethernet NIC
If your computer has an Ethernet NIC, you can connect the DSL-2740R to this Ethernet port using an Ethernet cable. You can also use the
Ethernet ports on the DSL-2740R to connect to other computers or Ethernet devices.
DHCP Client status
Your DSL-2740R ADSL Router is congured, by default, to be a DHCP server. This means that it can assign an IP address, subnet mask, and
a default gateway address to computers on your LAN. The default range of IP addresses the DSL-2740R will assign are from 192.168.1.2 to
192.168.1.254. Your computer (or computers) needs to be congured to Obtain an IP address automatically (that is, they need to be congured
as DHCP clients).
It is recommended that you collect and record this information here, or in some other secure place, in case you have to re-congure your ADSL
connection in the future.
Once you have the above information, you are ready to setup and congure your DSL-2740R Wireless ADSL Router.