Specifications
14D-Link DSL-2740R
Section 2 - Installation
Information you will need about the DSL-2740R
Username
This is the username needed to access the router’s management interface. When you attempt to connect to the device through a web browser
you will be prompted to enter this username. The default username for the router is “admin.” The user cannot change this.
Password
This is the password you will be prompted to enter when you access the router’s management interface. The default Password is “admin.” The
user may change this.
LAN IP addresses for the DSL-2740R
This is the IP address you will enter into the Address eld of your web browser to access the router’s conguration graphical user interface (GUI)
using a web browser. The default IP address is 192.168.1.1. This may be changed to suit any IP address scheme the user desires. This address will
be the base IP address used for DHCP service on the LAN when DHCP is enabled.
LAN Subnet Mask for the DSL-2740R
This is the subnet mask used by the DSL-2740R, and will be used throughout your LAN. The default subnet mask is 255.255.255.0. This can be
changed later.