Quick Installation Guide DSL-2650U 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch
DSL-2650U Quick Installation Guide BEFORE YOU BEGIN Delivery Package • Router DSL-2650U • Power adapter DC 12V/1A • RJ-11 telephone cable • Ethernet cable (CAT 5E) • Splitter • “Quick Installation Guide” (brochure). If any of the items are missing, please contact your reseller. The “User Manual” and “Quick Installation Guide” documents in Russian and English are available on D-Link website (see ftp.dlink.ru/pub/ADSL/DSL2650U/Description/).
DSL-2650U Quick Installation Guide System Requirements and Equipment • A computer with any operating system that supports a web browser. • A web browser to access the web-based interface of the router: Windows Internet Explorer, Mozilla Firefox, or Opera. • A NIC (Ethernet or Wi-Fi adapter) to connect to the router. • A 802.11b, g, or n Wi-Fi adapter to create a wireless network. • A 3G USB modem to connect to the Internet via 3G GSM or CDMA network1.
DSL-2650U Quick Installation Guide Supported USB Modems GSM modems: • Huawei E150 • Huawei E1550 • Huawei E160G • Huawei E169G • Huawei E220 • ZTE MF112 • ZTE MF626 • ZTE MF627. CDMA modems2: • Airplus MCD-650 • Airplus MCD-800 • AnyDATA ADU-300A • AnyDATA ADU-310A. ! The manufacturer does not guarantee proper operation of the router with every modification of the firmware of USB modems. 2 Performance of CDMA USB modems is not tested for the current firmware version.
DSL-2650U Quick Installation Guide CONNECTING TO PC PC with Ethernet Adapter 1. Make sure that your PC is powered off. 2. Connect an Ethernet cable between any of four Ethernet ports located on the back panel of the router and the Ethernet port of your PC. 3. To connect via 3G network: connect your USB modem to the USB port 3 located on the back panel of the router.
DSL-2650U Obtaining IP Address in OS Windows XP Quick Installation Guide Automatically 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. In the Network Connections window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed. 3. In the Local Area Connection Properties window, on the General tab, select the Internet Protocol (TCP/IP) line. Click the Properties button.
DSL-2650U Quick Installation Guide 4. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 5. Click the ОК button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
DSL-2650U Obtaining IP in OS Windows 7 Quick Installation Guide Address Automatically 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the Network and Internet section.) 3.
DSL-2650U Quick Installation Guide 6. Select the Obtain an IP address automatically and Obtain DNS server address automatically radio buttons. Click the OK button. 7. Click the OK button in the connection properties window. Now your computer is configured to obtain an IP address automatically.
DSL-2650U Quick Installation Guide PC with Wi-Fi Adapter 1. To connect via 3G network: connect your USB modem to the USB port 4 located on the back panel of the router. ! If you need to connect or change a USB modem to another one when the router is powered on, power off the router, connect the modem to the USB port, and power on the router. 2. To connect the router to a DSL line: connect a phone cable between the DSL port of the router and the ADSL OUT port of the splitter.
DSL-2650U Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows XP 1. Click the Start button and proceed to the Control Panel > Network and Internet Connections > Network Connections window. 2. Select the icon of the wireless network connection and make sure that your Wi-Fi adapter is on. 3. Search for available wireless networks. 4. In the opened Wireless Network Connection window, select the wireless network DSL-2650U and click the Connect button.
DSL-2650U Quick Installation Guide Configuring Wi-Fi Adapter in OS Windows 7 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category view (the Category value is selected from the View by drop-down list in the top right corner of the window), choose the View network status and tasks line under the Network and Internet section.) 3.
DSL-2650U Quick Installation Guide 6. In the opened window, in the list of available wireless networks, select the wireless network DSL-2650U and click the Connect button. 7. Wait for about 20-30 seconds. After the connection is established, the network icon will be displayed as the signal level scale.
DSL-2650U Quick Installation Guide CONFIGURING ROUTER Connecting to Web-based Interface 1. Start a web browser. 2. In the address bar of the web browser, enter the IP address of the router (by default, the following IP address is specified: 192.168.1.1). Press the Enter key. 3. On the opened page, enter the username (login) and password for the administrator account (by default, the following username and password are specified: admin, admin). Then click the Enter link.
DSL-2650U Quick Installation Guide After successful registration the router's quick settings page opens. On the page, you can proceed to the Wizards (use the Connect to internet, Host site, and Configure Wi-Fi buttons) or switch to the standard webbased interface of the router by clicking the Configure manually button. After clicking the button, the system statistics page opens. The page displays general information on the router and its software, and data on the DSL connection state.
DSL-2650U Quick Installation Guide Configuring Connection to the Internet ! You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP). Make sure that you have obtained all necessary information prior to configuring your WAN connection. Otherwise contact your ISP.
DSL-2650U Quick Installation Guide 5. Specify a name for your connection (any name for easier identification) in the Name field. 6. In the PPP section, enter authorization data provided by your operator (the username (login) in the Username field and the password in the Password and Password confirmation fields), or select the Without authorization checkbox if authorization is not required. 7.
DSL-2650U Quick Installation Guide ADSL WAN Connection 1. Go to the Net / WAN page and click the Add button. 2. In the General settings section, from the Provider drop-down list, leave the Manually value. 3. From the Connection Type drop-down list, select the needed value. 4. From the Port drop-down list, select the DSL(new) value. 5. Specify a name for your connection (any name for easier identification) in the Name field. 6.
DSL-2650U Quick Installation Guide 8. For the IPoA and Static IP connection types, fill in the IP Address, Netmask, and Gateway IP address fields in the IP section. 9. Deselect the NAT checkbox in the Miscellaneous section if your ISP requires you to disable the network address translation function. 10. Click the Save button.
DSL-2650U Quick Installation Guide Ethernet WAN Connection 1. Go to the Advanced / Interface grouping page. 2. Select the choice corresponding to the LAN port that will be used as the WAN port of the Ethernet WAN port radio button, and click the Save button. 3. Go to the Net / WAN page and click the Add button. 4. In the General settings section, from the Provider drop-down list, leave the Manually value. 5. From the Connection Type drop-down list, select the needed value. 6.
DSL-2650U Quick Installation Guide 8. For the PPPoE connection type, enter authorization data provided by your ISP in the PPP section (the username (login) in the Username field and the password in the Password and Password confirmation fields). If these data have not been provided by your ISP, select the Without authorization checkbox. 9. For the Static IP connection type, fill in the IP Address, Netmask, and Gateway IP address fields in the IP section. 10.
DSL-2650U Quick Installation Guide Configuring WAN Backup Function 1. Go to the Net / WAN page and create the main WAN connection. In the General settings section, select the Enable checkbox. 2. On the Net / WAN page, create the reserve WAN connection. In the General settings section, deselect the Enable checkbox. 3. Proceed to the Net / Watchdog page and select the Enable checkbox.
DSL-2650U Quick Installation Guide 4. In the Primary connection settings section, from the Connection name drop-down list, select a WAN connection which will be used as the main one. 5. In the Reserve connection settings section, from the Connection name drop-down list, select a WAN connection which will be used as the reserve one. 6. If needed, specify new values in the fields displayed on the page. 7. Click the Change button.
DSL-2650U Quick Installation Guide Configuring Local Area Network 1. Go to the Net / LAN page. If needed, change the IP address of the router's LAN interface and the mask of the local subnet in the IP Address and Netmask fields. Then click the Save button. 2. By default, the DHCP server of the router is enabled. In the DHCP server section, you can change the parameters of the DHCP server.
DSL-2650U Quick Installation Guide Configuring Wireless Network By default, the wireless network of the router is open (it requires no password to access it). To avoid unauthorized access to your wireless local area network, change the default settings of the router. Example of Wireless Settings 1. Go to the Wi-Fi / Security settings page. 2. Select the WPA2-PSK value from the Network Authentication dropdown list. 3.
DSL-2650U Quick Installation Guide Changing Administrator Password It is highly recommended to change the administrator password upon initial configuration. This helps you to improve your network security. 1. Go to the System / Administrator password page. 2. Enter a new password for the administrator account in the Password and Confirmation fields. 3. Click the Save button. ! Remember or write down the new password for the administrator account.
DSL-2650U Quick Installation Guide TECHNICAL SUPPORT You can find software updates and user documentation on our website. D-Link provides its customers with free support within the product's warranty period. Customers can contact the technical support group by phone or by email/Internet. FOR TELEPHONE NUMBERS AND ADDRESSES OF D-LINK OFFICES WORLDWIDE VISIT http://www.dlink.
