User manual

DSL-2520U ADSL2/2+ Router with USB and Ethernet Ports
User Manual
Configuring via Web-based Interface
Figure 36. The page for adding a rule for remote management.
You can specify the following parameters:
Parameter Description
Name
A name for the rule for easier identification. You can specify any
name.
Interface
A physical interface through which the web-based interface of the
router is accessed.
IP address A host or a subnet to which the rule is applied.
Mask
The mask of the subnet.
Protocol
The protocol available for remote management of the router (HTTP,
ICMP, TELNET).
Click the Change button.
To edit a rule for remote access, click the relevant link. On the opened page, change the needed
parameters and click the Change button.
To remove a rule for remote access, click the relevant link. On the opened page, click the Delete
button.
Page 47 of 67