User manual

DSL-2500U ADSL/Ethernet Router
User Manual
Configuring via Web-based Interface
To specify URL addresses to which the selected filtering will be applied, go to the URL
addresses tab and click the Add button.
Figure 46. The Control / URL filter page. The URL addresses tab.
On the opened page, specify the needed parameters.
Figure 47. The page for adding an address for the URL filter.
Enter a URL address in the URL address field, specify a port (as usual, you need to specify port
80 for HTTP), then click the Save button.
To remove an address from the list of URL addresses, select the relevant address in the table on the
URL addresses tab and click the Delete button.
To disable the URL filter, deselect the Enable/Disable URL filter checkbox on the
Configuration tab, then click the Change button.
Page 55 of 63