User manual

DSL-2500U ADSL/Ethernet Router
User Manual
Configuring via Web-based Interface
Figure 31. The page for adding a static route.
You can specify the following parameters:
Parameter Description
Destination network A destination network to which this route is assigned.
Destination netmask
The destination network mask.
Gateway
An IP address through which the destination network can be
accessed.
Metric
A metric for the route. The lower the value, the higher is the route
priority. Optional.
Via Interface
Select an interface (connection) through which the destination
network can be accessed from the drop-down list. If you have
selected the <Auto> value of this drop-down list, the router itself sets
the interface on the basis of data on connected networks.
Click the Save button.
To edit an existing route, select the needed route in the table. On the opened page, change the
needed parameters and click the Save button.
To remove an existing route, select the needed route in the table. On the opened page, click the
Delete button.
Page 40 of 63