User manual

Section 3 – Configuration

D-Link DSL-2500U User Manual

QUICK SETUP - PPPoA

This window allows you to enter an IP address and Subnet Mask for the

LAN interface. In addition, you can either Enable or Disable the DHCP

Server.

To enable the DHCP Server, enter a Starting IP Address, an Ending IP

Address, and a Subnet Mask. You may also choose to change the default

value of the Leased Time.

Tick the Configure the second IP Address and Subnet Mask for LAN

interface checkbox if you want to enable a second IP Address on the LAN

connection. Type the IP Address and Subnet Mask you want to use as the

second IP address in the IP Address and Subnet Mask fields that appear

below the checkbox.

Click the Next button to continue.