User manual

8D-Link DSL-2320B ADSL2+ Ethernet/USB Modem User Manual
Section 2 - Installing The Modem
Connect the Power Adapter
• Complete the process by connecting the supplied 12VAC, 1A power adapter to the POWER connector
on the back of the device and plug the adapter into a wall outlet or power strip. Then turn on and boot up
your PC and any LAN devices, such as hubs or switches, and any computers connected to them.
• If your LAN has more than one computer, you can attach one end of an Ethernet cable to a hub or a
switch and the other to the Ethernet port (labeled LAN) on the modem. Note that either a crossover or
straight-through Ethernet cable can be used. The modem automatically recognizes the type of connection
that is required.