User manual

55D-Link DSL-2320B ADSL2+ Ethernet/USB Modem User Manual
Section 10 - Status
A Bit Error Rate Test (BER Test) is a test that reflects the ratio of error bits to the total number transmitted.
ADSL BER Test
If you click on the ADSL BER Test button at the bottom of the ADSL Statistics
page, the following pop-up screen will appear allowing you to set the tested
time and to begin the test. Click Start to begin the test.
When you start the ADSL BER Test, the following progress window will display
the connection speed as well as the length of time that the test will run for.
At any time during the test, click on the Stop button to terminate the test.