User manual

41D-Link DSL-2320B ADSL2+ Ethernet/USB Modem User Manual
Section 9 - Tools
Access Control—IP Address
Web access to the modem can be limited when Access Control Mode is enabled.
Add the IP address to the IP address list by clicking on the
Add button, then select Enabled to enable Access Control
Mode.
Enter the IP address of the management station permitted
to access the local configuration and click Apply. This will
return you to the previous screen where you can enable
access control.
If Access Control Mode is disabled, any workstation connected
locally to your modem can access the web interface provided
the correct username and password is supplied at log on.