Installation guide

ManualsBrandsD-Link ManualsNetwork CardDSL-200

Before Your Begin

This Quick Installation Guide gives step-by-step instructions for setting up the

D-Link DSL-200 ADSL Modem. For more detailed information about the ADSL

Modem, its components, making network connections and technical specifications,

please refer to the User’s Guide on the CD-ROM included with your ADSL Modem.

Check Your Package Contents

These are the items included with your DSL-200 purchase:

If any of the above items are missing, please contact your reseller.

•

DSL

200 ADSL Modem (USB interface)

• CD-ROM (containing Driver and User’s Guide)

• Quick Installation Guide

• USB Cable

• RJ-11 Cable

DSL

200

D-Link USB

ADSL Modem

Summary of content (10 pages)

PAGE 1
DSL-200 D-Link USB ADSL Modem Before Your Begin This Quick Installation Guide gives step-by-step instructions for setting up the D-Link DSL-200 ADSL Modem. For more detailed information about the ADSL Modem, its components, making network connections and technical specifications, please refer to the User’s Guide on the CD-ROM included with your ADSL Modem.
PAGE 2
Install Modem Driver Before starting the software setup process, close all windows and quit any application programs you are running. The installation procedure presented here is the same for Mac 8.6, Mac OS 9.x and Mac OSX 10.1.x and above. You need to install the device drivers first and then perform the hardware installation steps below. 1. Insert the DSL-200 Installation CD into the CD-ROM drive. To view the contents of the CD, open CD ROM from the desktop. Select the folders “ Mac ” on the CD. 2.
PAGE 3
4. The “License Agreement” screen will appear. Click Accept. 5. When all necessary files have been copied, the “Finished” screen will appear. Click Finish. Mac OSX 10.x operating systems will request restart. Mac 9.x does not require a restart 6. The USB driver is now installed. Before using your USB ADSL modem, connect the modem to the computer using the proper USB device cable and connect the DSL line to the USB ADSL modem.
PAGE 4
MAC OS 9.x If you have not done so yet, please install the PPPoA VC driver first (refer to the Install Guide). Then connect the USB ADSL modem to the computer using the proper USB device cable. Connect the ADSL line to the USB ADSL modem too. TCP/IP settings are set up automatically during the software installation process. The following procedure may be used to change TCP/IP settings, if necessary. 1. Click on the Apple icon ( ), then select Control Panels à Modem 2.
PAGE 5
. The “TCP/IP” window will appear. • Make sure that PPP is selected in the Connect via: drop-down list. • The Configure: drop-down list should show Using DHCP Server. 6. Close the “TCP/IP” window. You will be prompted to save the current configuration. Click Save. 7. Click on the Apple icon ( ), and then select Control Panels à Remote Access. 8. The “Remote Access” window lets you set up the remote login parameters.
PAGE 6
Note: If you do not see the Name and Password fields, click on the small triangle to the left of the word Setup. • Enter your userid in the Name field. • Type in your password in the Password field. • Choose whether or not to have your password saved by checking or unchecking the Save Password check box. • Enter any number in the Number field. • You may wish to use the Options button to set up some additional connection and protocol settings, or accept the default.
PAGE 7
MAC OS X If you have not done so yet, please install the PPPoA VC driver first (refer to the Install Guide). Then connect the USB ADSL modem to the computer using the proper USB device cable. Connect the ADSL line to the USB ADSL modem too. TCP/IP settings are set up automatically during the software installation process. The following procedure may be used to change TCP/IP settings, if necessary. 1. Open System Preferences and select Network. 2.
PAGE 8
3. From the Show pull down menu, select the new port, USB-ADSL Modem. 4. Select the Modem tab. In the Modem pull down menu, select ADSL USB Modem. Uncheck Wait for dial tone before dialing. Check Show Modem Status in menu bar.
PAGE 9
5. Select the PPP tab. Enter your username (account name). If you want to make your password permanently saved, enter it and check Save password. Configure any other PPP Options as desired. 6. Select the TCP/IP tab and select the way you would like to obtain your IP address. The recommended way is Configure Using PPP.
PAGE 10
7. Click Apply Now. Close the System Preferences application. The installation and configuration is now complete. Establishing a Connection 1. Open the Internet Connection application (which looks like a modem dialer) by clicking the icon at the top right side of the screen and selecting Open Internet Connection from the menu. 2. In the Configuration drop down menu, select your adapter’s port USBADSL Modem and fill in the password if it was not provided in Step 5 above and click Connect. 3.