User`s guide

3
Operating Systems:
•= Windows 95
•= Windows 98
•= Windows NT 4.x
NOTE: You will need the Windows operating system installation files (CAB files) to
complete the installation.
The installation procedure varies according to the operating system you are using. It is
critical that you use the correct installation procedure for your operating system.
Gathering Information
To make connecting and configuring your DSL-100 as easy and straightforward as
possible, gather the information listed on the form that follows. Fill out the appropriate
sections of the form for your operating system and ISP. Refer to the information during
the installation and store the form in case you need to update the information at a later
date.
If you are using Windows 95, you must upgrage your Dial-Up Networking (DUN)
application to version 1.3 or above. The Microsoft DUN is available for download from
Microsoft at www.microsoft.com.
Determine Your Operating System
You must use the correct installation procedure for your operating system. If you are not
sure exactly which operating system you are using, follow the instructions and write
down the information on the form provided.
Follow these steps to determine your operating system:
1. Go to the desktop. Right click on My Computer and select Properties.
2. Click on the General tab. The version number of your operating system is
displayed. Refer to the table for more detailed information.
Version System Description Release Name
Win 95A 4.000.950A Windows 95 OSR1
Win 95B 4.00.950B Windows 95 OSR2
Win 98 4.10.1998 Windows 98
Win 98A 4.10.2222A 2
nd
Edition Windows 98 2
nd
Edition
Win NT 4.x Windows NT 4.x
Internet Service Protocol
Your Internet Service Provider (ISP) uses one of the protocols listed below. Look over
the information provided by your ISP or call their technical support if you are not sure
which protocol they are using.