User`s guide

Step 1

Introduction

This section describes the ADSL PCI modem card, its features, and system requirements.

Features

The DSL-100 is an internal ADSL PCI modem card designed for use with Windows 95,

98, and NT 4.x. This ADSL modem card connects to a telephone line using a standard

RJ-11 connector and follows all the latest PC industry guidelines, including Plug 'n Play.

To insure interoperability with service provider DSL systems your ADSL modem card

supports DMT (Discrete Multi-Tone) modulation.

Performance features:

•= Remote bridging with RFC 1483 encapsulation, both LLC-SNAP and VC

multiplexing options

•= Classical IP over ATM per RFC 1577

•= PPP over ATM

•= Full LCP: NBCP, IPCP, and IPXCP

•= Authentication: PAP, CHAP, SPAP, and Microsoft(r) password encryption

extensions

•= TAPI style interface

•= Van Jacobsen IP header compression

•= Software frame compression

System Requirements

D-Link recommends that your PC system meet the following minimum requirements to

be able to use the DSL-100 ADSL PCI Modem Card:

•= An IBM PC or compatible computer with a Pentium 100Mhz or faster processor

•= 30 megabytes of free hard disk space

•= 32 megabytes or more of main memory (RAM)

•= A 24x or faster CD-ROM drive

•= Microsoft Windows 95 (OSR1 or OSR2), 98 (1st or 2nd edition), or NT 4.x

(Service Pack 3)