User`s guide

26
Step 5
Using the DSL-100
This chapter goes over activating as well as how to uninstall the DSL-100.
Activating the DSL-100
For RFC 1483 and RFC 1577:
Once the drivers are installed and the setup is complete, the D-Link DSL-100 is ready to
run. Each time the computer is turned on, the modem card automatically connects to the
central office equipment. Simply run an Internet browser to confirm this.
For PPP over ATM:
From the Start menu, select Program, select Accessories, select Communications, and
select Dial up Network. Double-click the network icon created earlier.
When the Connect to window appears, enter the user name and password. Click on
"Connect" and enter the user name, password, and login domain information in the user
login window. Click "OK." If the connection is successfully established, Windows will
display a connection established window. Click "Close." PPP over ATM is now running.
Uninstalling the Card and Test Application
To uninstall the software drivers:
Right-click on My Computer, select Properties, select Device manager, scroll down to
"Network Adapters, " and open the "Network Adapters" folder.
Right-click "D-Link ADSL PCI Modem Card" and click "Remove." Click "OK" when
prompted with a warning about removing the adapter. Click "OK" to close the Systems
window.
Uninstalling the test application:
From the Start menu, select Programs, select "D-Link DSL-100 ADSL Modem," select
"Uninstall D-Link DSL-100 ADSL Modem," and then click "Uninstall Test Application."