User`s guide

25
RFC 1483 Bridged Ethernet Over ATM Windows NT 4.x
1. At the desktop, double click My Computer, double click Control Panel, double
click Network and then select the Adapters tab and click Add.
2. In the Select Network Adapter window click Have Disk.
3. Insert the driver disk.
4. The Insert Disk window appears. Enter the path to your CD ROM drive. For
example, D:\1483NT4 and click OK.
5. The Select OEM Option window will find the ADSL PCI NIC. Click OK.
6. When the Service Option window appears, click Advanced.
7. The Service Option window now displays the Connection Address and Select
ADSL Mode sections.
In the Network Protocol and PVC setting section, select Ethernet over ATM then
enter in the VPI and VCI values provided by your ADSL service provider.
In the Select ADSL Mode section, select the mode recommended by your ADSL
service provider. Click on the mode s required and then click OK.
8. The previous Service Option window will appear, click Next.
9. Then the Network window will appear, click Close.
10. The TCP/IP Properties window will appear and prompt the user for information.
When not connecting to a DHCP server, enter the IP address provided by the
ADSL service provider.
11. Enter the Subnet Mask provided by your ADSL service provider.
12. Enter the Default Gateway address.
13. Select the DNS Configuration tab and enter the Host Name.
14. Then enter the Domain Name.
15. Click OK to update the changes.
16. The system must be restarted for the changes to take effect. Click Yes to restart.