Manualshelf

User`s guide

ManualsBrandsD-Link ManualsModemDSL-100D
21222324252627282930
22
Windows 98 (Both Versions)
RFC1577 Classical Internet Protocol over ATM
1. The Add New Hardware Wizard window will automatically appear and indicate
that a new PCI Network Controller has been found. Click Next.
2. The select Search for the best driver for your device. (Recommended), click Next.
3. Insert the driver CD into your drive.
4. Then select Specify a location and enter the path to your CD. It should look like
this: D:\1577w98, then click Next.
5. The Add New Hardware Wizard appears and indicates that the ADSL PCI NIC.
Click Next.
6. The Service Option window appears, click Advanced.
7. The Service Options window now displays the Network Protocol and PVC
Settings and Select ADSL Mode sections.
In the Network Protocol and PVC Settings section, select the Classical IP over
ATM setting and then enter in the VPI and VCI values provided by your ADSL
service provider. Make sure the Framing is set to VC MUX.
In the Select ADSL Mode section, select the mode recommended by your ADSL
service provider. Click on the mode required and then click OK.
8. The previous Service Options window will appear, click Next.
9. If prompted to insert the Windows 98 CD, do so. Type the path to the Win98
folder on the CD and click OK.
10. When the driver installation is complete, click Finish.
11. Restart your computer. The Diagnostic Tool icon will be active after you restart.
12. You must now make a network connection. From the Start menu on the tool bar,
select Settings, Control Panel, and then double click on the Network icon.
13. The Network window appears. Select the Configuration tab, scroll down until you
find the ADSL PCI NIC.
14. When the Network window appears select the Configuration tab and scroll down
to select TCP/IP > ADSL PCI NIC.
15. Still in the Network window, with the TCP/IP > ADSL PCI NIC selected, click
Properties. Select the Advance tab. The Binding to ATM value should be set to
YES, then click OK.
16. Still at the Network window, click the Configuration tab, select TCP/IP > ADSL
PCI NIC. Then click the Properties button.