User`s guide

18
4. The Select Other Location window appears. Enter the drive letter and path to your
CD ROM drive followed by 1577w95. For example, D:\1577w95, where D is the
drive letter of the CD ROM.
5. The Update Device Driver Wizard will then find the DSL-100. Click Finish.
6. The Insert Disk window appears. Insert the DSL-100 driver CD and click OK.
7. The Copying Files window appears. Again type in your systems CD drive
location letter and driver D:\1577w95 and click OK.
8. When the Service Option window appears, click Advanced.
9. The Service Options window now displays the Connection Address and Select
ADSL Mode sections.
In the Network Protocol and PVC Setting section, select the Classical IP over
ATM setting and then enter the VPI and VCI values provided by your ISP. Make
sure the Framing is set to VC MUX.
In the Select ADSL Mode section, select the modes required and then click OK.
10. The previous Service Option window will appear, click Next.
11. When finished, the Diagnostic Tool icon is active and monitoring connectivity.
You must now make a network connection.
Windows 95 Point to Point Internet Connection
1. Double click the My Computer icon on the desktop. Then double click the Dial-
Up Networking icon.
2. The Dial-Up Networking window appears. Double click on the Make New
Connection icon.
3. The Make New Connection window appears. The default name for the computer
you are dialing is My Connection. In the Select a device bar, use the scroll down
menu to locate the DSL-100, then click Next.
4. A new Make New Connection window appears. Enter in the Host Name or IP
Address provided by your ISP. If they have not provided a Host Name or IP
Address, enter zero and click Next.
5. Another Make New Connection window appears. It will indicate that You have
successfully created a new Dial-Up Networking connection called My
Connection. Click Finish.
6. The new connection will appear in the Dial-Up Networking window. Double-
click the new connection. My Connection icon to begin a Dial-Up session.
7. The Connect To window appears. Enter the User Name and Password supplied by
your ISP. Then click Connect.
8. The Connecting to My Connection window appears. The message Logging on to
the network confirms a valid connecting process.