User`s guide

14
RFC 1483 Bridged Ethernet over ATM (Windows 98/98SE)
1. The Add New Hardware Wizard will detect the DSL-100 as a PCI Network
Controller, click Next.
2. In the Add New Hardware Wizard you will be prompted What do you want
Windows to do? Select the Search for the best driver for your device. Click Next.
3. Again in the Add New Hardware Wizard, select the Specify a location option and
then type in your systems CD drive location letter. For example, D:\1483w98,
then click Next.
4. The Add New Hardware Wizard will then find the ADSL PC NIC, click Next.
5. When the Service Option window appears, click Advanced.
6. The Service Option window now displays the Connection Address and Select
ADSL Mode sections.
In the Network Protocol and PVC setting section, select Ethernet over ATM, then
enter in the VPI and VCI values provided by your ADSL service provider.
In the Select ADSL Mode section, select the mode recommended by your ADSL
service provider. Click on the mode required and then click OK.
7. The previous Service Option window will appear, click Next.
8. The Add New Hardware Wizard appears, click Finish.
9. When the System Settings Change window appears and asks, Do you want to
restart your computer now? Click Yes.
10. Proceed to Making an Internet connection for Bridged Ethernet.