User`s guide
13
6. When the Service Options window appears, click Advanced.
7. The Service Options window now displays the Connection Address and Select
ADSL Mode sections.
In the Network Protocol and PVC Settings section, enter in the VPI and VCI
values provided by your ADSL service provider. Make sure the Framing is set to
VC MUX.
In the Select ADSL Mode section, select the mode recommended by your ADSL
service provider. Click on the modes required and then click OK.
8. The previous Service Option window appears, click Next.
9. If prompted to insert your Windows CD do so at this time then click OK. Enter
the <CD drive letter> and then :\Win98 and click OK.
10. At the conclusion of the driver installatio, the Add New Hardware Wizard
window appears and displays the your new DSL-100. Click Finish.
11. The System Settings Change window appears. For the PC system to set up the
DSL-100, a system Restart is required. Click Yes. After restarting the system, the
Diagnostic Tool icon is required.
12. You must now make a Dial-Up network connection. At the Task bar, click on
Start, and then select Programs, Accessories, Communications, followed by Dial-
Up Networking.
13. The Dial-Up Networking window appears. Double click the Make New
Connection icon.
14. The Make New Connection window appears. The default name for the computer
you are dialing is My Connection. However, you can name the connection
anything you want. In the Select a device bar, use the scroll down menu to locate
the DSL-100 and then click Next.
15. A new Make New Connection window appears. Enter in the Host Name or IP
Address provided by your ADSL service provider, otherwise enter zero and click
Next.
16. Another Make New Connection window appears. It will indicate that You have
successfully created a new Dial-Up Netwroking connection called My
Connection, click Finish.
17. The new My Connection will appear in the Dial-Up Networking window. Double
click the new My Connection icon to begin a Dial-Up session.
18. The Connect To window appears indicating My Connection. Type in the User
name and Password supplied by your ISP and click Connect.
19. The Connection Established window will appear indicating you are connected to
My Computer. Click Close and the Diagnostic tool icon appears on the task bar.
20. Your Internet connection should be established at this point.