User`s guide

12
Figure 10: Click Finish.
Figure 11: Click Yes to restart your PC.
Your D-Link DSL-100 adapter card is now ready for use with your ADSL phone line.
In the event that the installation does not automatically install the necessary network
protocols for PPPoA and RFC 1483, please refer to the following sections which outline
a manual installation of the protocols:
Point to Point Protocol over ATM (Windows 98/98SE)
1. The Add New Hardware Wizard window automatically appears and indicates that
that new PCI Network Controller has been found. Click Next.
2. Still in the Add New Hardware. You will be asked What do you want Windows to
do? Select Search for the best driver for your device, then click Next.
3. Insert the driver CD.
4. Specify the location of the driver CD and click Next.
5. The Add New Hardware Wizard appears and indicates that new device has been
found. Click Next.