User`s guide

7
Step 3
Software Installation and Configuration
Windows automatically detects new hardware when it is added to the computer. The Add
New Hardware Wizard appears to guide you through the Software Installation.
In order for the DSL-100 to work you must configure it properly. The following sections
show you the steps. You must enter the proper configurations for the:
•= Classical IP over ATM
•= Ethernet over ATM
•= VPI
•= VCI
•= Frame Type must be set for the DSLAM machine
•= ADSL Mode
The Digital Subscriber Line Access Multiplexer (DSLAM) is a machine at the phone
company’s central office that links many DSL connections to a single high speed Internet
connection. Please refer to your DSL provider’s documentation for information on the
settings you should use. If you have questions about these settings, contact your DSL
provider. Your DSL provider can tell you the specific configurations that you need.