User`s guide

6
Step 2
Hardware Installation
This chapter provides unpacking information and helps you get started with the basic
installation of the ADSL PCI modem card and its drivers.
Unpacking
Open the shipping carton of the ADSL PCI modem card and carefully unpack its
contents. The carton should contain the following items:
= One ADSL PCI modem card
= This User's Guide
If any item is found missing or damaged, please contact your local supplier for
replacement.
Hardware Installation
The DSL-100 card must be installed on the computer’s Mainboard. Since this is an
electrical device, safety is important. First, properly shutdown the computer and unplug
the computer’s power cord. Touch an unpainted screw on the back of the power supply
with the tip of your screwdriver to discharge any static electricity and prevent possible
damage to the DSL-100 card and computer components. Open the computer’s case.
Insert the DSL-100 card into an open PCI slot. Insert the card straight in and gently push
straight down until it seats firmly and has good connection. Screw the bracket on the back
of the card to the case so the card is firmly held in place.
Put the case back on the computer and plug the power cord back in. The physical
installation of the DSL-100 card is now complete.
Figure 1: Insert the DSL-100 into the PCI slot.