Specifications

42
Using the Surveillance Software
Upon completion of the installation of the Surveillance Software, you can run
the Monitor program from:
Start\ Program Files\D-Link\Surveillance System Software\Monitor
or the directory you specified during the installation.
You will be asked to set the root password first, and the password should be at
least 6 characters in length.
A successful message box will show if you set the root password successfully.
An Authentication dialog will appear. Enter “root” login for the first time and
enter a password..
You will see the Monitor program on your display.
Installation of the Surveillance Software is detailed in an earlier section
of this manual titled Installation of the Surveillance Software under
the main section titled Software Installation.
Click OK
Click OK
Monitor Program
Click OK
root
**********