DSC-350F Dual-Mode Digital Camera Manual Rev.
Contents Camera Precautions .............................................................................. 1 Accessories.............................................................................................. 2 Meet the DSC-350F................................................................................. 3 Front View.............................................................................................. 3 Back View..............................................................................
Camera Precautions Please follow these guidelines when using your DSC-350F: § Keep the camera from the following environments • High temperatures such as direct sunlight, heater, closed vehicle or other hot sources • Excessive humidity • Dust • Unstable surfaces • Snow • Rain § If the lens or the viewfinder gets dirty, please clean them by using a lens brush or soft cloth. § Never touch the lens with your fingers.
Accessories 1. 2. 3. 4. 5. 6. 7. Camera Cradle Two AA alkaline batteries Camera hand strap Camera driver and utility software CD USB cable Camera pouch Q.I.
Meet the DSC-350F Front View Back View
LCD Panel Indicator 7 8 9 6 1 5 2 4 1 3 Picture Counter Total number of pictures you have captured 2 Continuous Capture Continuous capture mode 3 Image Resolution 640 x 480 pixels (default setting) 320 x 240 pixels
4 Shooting Environment Outdoor 1 (Cloudy) Outdoor 2 (Sunny) Indoor 1 (Bright) Indoor 2 (Dark) 5 Memory Full Memory full icon 6 Flash Mode Auto mode Off mode (default setting, no icon display) 7 Picture Delete Delete all pictures Delete last picture
Self-timer Self-timer mode 9 Low Battery Warning This icon will blink when battery power is low. Please replace the battery soon. Camera Function Selection Press then Mode button to select the function you need. The function icon on the LCD panel will blink. Press and hold the Select button until you hear a beep to confirm your selection.
Using the DSC-350F as a Digital Camera Turn Power On and Off Power on: Power off: Press the Power On button and camera will beep. Press the Power On button again and camera will beep. Note: The camera will be automatically turn off power if unused for about 60 seconds. Taking Pictures With the camera powered on, select focus mode for your application Standard mode (0.9m ~ infinity) You should use this mode in most all circumstances. Macro mode (25cm ~ 30cm) For taking close-up pictures.
Self-timer Capture The Self-timer mode allows you to take pictures using a delayed capture setting. The Self-timer mode will delay taking a picture for a 10 second period. Follow these instructions to use the Self-timer mode. 1. Press the Mode button until you see 2. Press the Shutter button. 3. The self-timer LED will blink and the camera will beep for 10 seconds. 4. Once 10 seconds has transpired, the camera will take the picture.
Continuous Capture The Continuous Capture mode allows you to take multiple photos in rapid succession. 1. Press the Mode button until the icon is shown. 2. Press and hold the Shutter to begin taking pictures. 3. The picture counter will count up as pictures are being taken. 4. To stop taking pictures, remove your finger from the Shutter button. Note: The continuous capture mode will stop automatically If the memory gets full.
Selecting Image Resolution This section describes how to change the resolution that your pictures will be taken in. Please note that when using a higher resolution (640x480), the file sizes will be larger and will take up more memory. However, the higher resolutions will provide more detail in your photos. Press the Mode button to change to the following icons. 640 x 480 pixels (default setting) The camera can hold about 70 pictures. 320 x 240 pixels The camera can hold about 180 pictures.
Installing the Optional Utility Software This section describes how to install the software included on the software CD. You do not need to install this software unless you don’t already have a TWAIN compliant imaging software or retrieving the photos, or video software for the webcam. Follow the following instructions to install the software that you want to install. 1. Insert the software CD into the CD-ROM drive as shown below. 2. Click the button that corresponds to the software you want to install. 3.
Transferring Pictures to Your PC Once you have the TWAIN driver and utility software installed in your PC, you may start download pictures from the camera to your computer. Connecting the Camera to you PC Use the supplied USB cable to connect the camera to your computer Once connected, Windows will complete the following USB device installation. These are found in Windows Device Manager.
Transferring Pictures from Camera Follow these steps to transfer the pictures on the camera to your computer. These instructions use ArcSoft’s Photo Impression 2000 software as the imaging software. You may use other TWAIN compliant imaging software such as Adobe Photoshop, but the instructions will not follow these steps. 1. Open "Photo Impression 2000" using the Start menu. 2. Click the Get Photo button. 3. Click the Camera/Scanner button. 4. Select "D-Link DSC-350F" from the “Select Source” list. 5.
6. Click the Acquire button. The Camera TWAIN software window will open. 7. The pictures you taken will automatically display in the TWAIN window. 8. Choose pictures that you want or click Select All to select all pictures, then click the Transfer button.
Creating an AVI Video File If you want to make a video out of the pictures you took when using the Continuous Capture Mode 1. Use the Continuous Capture Mode on the camera. 2. Connect your camera to the PC with the USB cable and start the AVI maker from the Windows programs menu by clicking on Start, Programs, DSC-350F and then AVI Maker. 3. AVI Maker will automatically read the continuous pictures from the camera and show the following window. 4.
Using the DSC-350F as a PC Camera (Webcam) You can connect the DSC-350F to your computer and use it as a PC camera, or webcam as it is sometimes called. Follow these steps to use the camera as a webcam. 1. Connect the USB cable to the camera and to your PC’s USB port. The LCD panel will display PC. 2. See the documentation of the PC camera software you are using for instructions on using the DSC-350F as a PC camera. 3. Normally, you will need to select which camera you would like to use as the webcam.
Specifications Resolution: Digital Camera mode: 640 x 480 pixels 320 x 240 pixels PC Camera mode: 640 x 480 pixels 320 x 240 pixels 160 x 120 pixels Focus Standard mode: 0.
Limited Warranty D-Link Systems, Inc. (“D-Link”) provides this limited warranty for its product only to the person or entity who originally purchased the product from; • D-Link or its authorized reseller or distributor. • Products purchased and delivered with the fifty United States, the District of Columbia, US Possessions or Protectorates, US Military Installations, addresses with an APO or FPO.
D-Link for the Software. The Warranty Period shall extend for an additional ninety (90) days after any replacement Software is delivered. If a material non-conformance is incapable of correction, or if D-Link determines in its sole discretion that it is not practical to replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by D-Link; provided that the non-conforming Software (and all copies thereof) is first returned to D-Link.
HEREIN, THE PRODUCT IS PROVIDED “AS-IS” WITHOUT ANY WARRANTY OF ANY KIND INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OF SUCH IMPLIED WARRANTY SHALL BE LIMITED TO NINETY (90) DAYS.
D-Link Offices D-Link Australia Unit 16, 390 Eastern Valley Way, Roseville, NSW 2069, Australia TEL: 61-2-94177100 FAX: 61-2-94171077 URL: www.dlink.com.au D-Link Canada #2180 Winston Park Drive Oakville, Ontario, L6H 5W1 Canada TEL: 1-905-8295033 FAX: 1-905-8295095 URL: www.dlink.ca D-Link China 2/F., Sigma Building, 49 Zhichun Road, Haidian District, 100080 Beijing, China TEL: 86-10-88097777 FAX: 86-10-88096789 D-Link South America Isidora Goyeechea 2934 of 702, Las Condes Santiago ¡V Chile S.A.
