Installation guide

Baby Explorer 1.3 Installation Guide
20 26-Aug-2005
5. If necessary, select an appropriate video standard. NTSC is the default standard.
6. Click
Save. The Live Screen Settings dialog box closes automatically.
7. Close the Baby Explorer application.
Configuring the Video Source Settings
The Microsoft program AMCAP allows you to set the video input connection and adjust
the format settings.
> To configure the video source settings
Note: The menu names and options in the AMCAP program differ depending on the
type of video capture device you have installed (see “Installing the Video Capture
Device” on page 13). This procedure only provides one example.
1. In the Taskbar, click
Start, Programs, Cedara, amcap.
2. Select the video capture device you are using, normally from the Devices menu.
3. Select the appropriate video source (i.e.,
Composite or S-Video) depending on the
type of video capture device you have installed. This is normally selected from the
Options menu. If necessary, also select an appropriate video standard.
4. Select the appropriate video format, normally from the Options menu. This can
include Color Format and Custom Size. For Custom Size, enter the width and height
appropriate for your video device.
5. In the Options menu, select
Preview to view the input video that is being recorded in
the application’s window.
6. Close all windows.
> To test the configuration
1. In the Taskbar, click
Start, Programs, Cedara, Baby Explorer Launcher, or double-
click the Baby Explorer shortcut on the desktop (shown here).
2. In the 2D window, click
Live Video.
3. The application starts the live video feed from the connected ultrasound machine.
4. Right-click anywhere on the window to start image acquisition. The application
displays a red circle indicating that acquisition has begun.
5. Right-click to stop the acquisition.
6. If the Input Scan Information dialog box appears, click
OK.
7. The application removes the red circle and displays the acquired image at the bottom
of the window.