Installation guide

Chapter 3: Installing the Hardware
26-Aug-2005 15
Installing the Device Driver
Follow the manufacturer’s instructions for installing the software driver for the video
capture device.
Caution: The device driver must be intended for the video capture device. The
use of an incorrect driver can cause damage to the video capture device
or the workstation. Refer to the model number, part number, product
ID, and product description to ensure that the proper device driver is
being used.
Installing the License Dongle
To execute a licensed version of the Baby Explorer application you must first install a
Rainbow SuperPro dongle — a serialized hardware key that prevents unauthorized use of
the application.
Note: If the dongle is not installed, only a demonstration version of the application will
be executed.
There are two types of dongle depending on the port available on the workstation.
> To connect a USB port dongle
1. Plug the dongle into a USB port located on the back of the workstation. The USB port
dongle is a Plug and Play device and therefore you do not need to shut down the
system to install the device. If the USB ports are already occupied, you can attach a
hub to provide more ports and plug in additional devices as needed.
2. In the Found New Hardware wizard dialog box, click
Cancel.
USB Port Dongle Parallel Port Dongle
(Preferred device)