User manual

Setting up the DPR-1040

D-Link DPR-1040 User Manual 15

Web Configurator

1. After following the hardware installation steps in section 3, ensure your wireless

network is operating normally. When ready, type the IP address of the DPR-1040

into your browser, the default IP address is

192.168.0.10

. If this does not work, use

the PS-Link utility to find out the IP address.

Upon accessing the web configurator, click

Setup

Wireless Setup.

3. On the next screen, enter the wireless network settings as provided by your

network administrator.

4. Click

Apply Settings

, the DPR-1040 will restart and the wireless setup is

complete.

Note: If your wireless connection does not work, check that you have entered the

correct network settings into the Wireless Setup screen.