Systems Network Router User Manual

7 D-Link DPR-1260 Quick Install Guide

WEP Encryption

It is recommended to enable encryption on your wireless router before

your wireless print server. Please establish wireless connectivity

before enabling encryption. Your wireless signal may degrade when

enabling encryption due to the added overhead.

1. Log into the web-based

conﬁguration (refer to page

5). Click on Setup and then

Wireless Settings on the

left side.

2. Next to Security Mode,

select WEP.

3. Next to Authentication,

select Shared Key.

4. Select either 64-bit or 128-bit encryption from the drop-down

menu next to WEP Encryption.

5. Next to Key 1, enter a WEP key that you create. Make sure you

enter this key exactly on all your wireless devices. You may enter

up to 4 different keys.

6. Click Save Settings to save your settings.