USB MULTI-FUNCTION PRINT SERVER DPR-1020 Quick Install Guide+ Руководство по быстрой установке+ Guía de instalación rápida+ Guia de instalação rápida+ 快速安裝手冊+ Petunjuk Pemasangan Cepat+
DPR-1020 USB Multi-Function This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7.0 Print Server Before You Begin This Quick Installation Guide provides you with step-by-step instructions to set up your MFP Server and start your printing tasks. The model you have purchased may be slightly different from those seen in the illustrations.
EXTERNAL FEATURES Physical Interfaces DC Power Connector DC Power Connector USB Port USB Port The DPR-1020’s USB port is located on the rear panel. The port can be configured using the web configurator which allows users to configure settings through their web browser. The default IP address of the DPR-1020 is automatically acquired from a DHCP server on the network. If a DHCP server cannot be found the default IP address for the DPR-1020 will be 192.168.0.10.
LED INDICATORS The top panel of the Print Server features three LED indicators: Power A steady blue light confirms that the Print Server is turned ON. USB A steady blue light indicates the printer is online and successfully connected to the print server. This light will also blink to indicate that data is being transferred between the print server and printer. Link/Act A steady blue light confirms that the Print Server has a connection to an Ethernet network.
HARDWARE INSTALLATION WARNING: There may be configuration problems if the Print Server is turned on without first establishing a network connection. Follow the steps below to avoid any complications during the hardware installation: 1. Confirm that the printer you will use to connect to the DPR-1020 is operating correctly. 2. When you have confirmed that the printer is operating correctly, switch its power OFF. 3. Confirm that your network is operating normally. 4.
PS SOFTWARE INSTALLATION PS Software (Windows Vista/XP/2003/2000) includes both PS-Link and PSWizard. PSLink can help you set up your printer for multi-function printing using your manufacturer’s drivers. PS-Wizard is a utility that enables you to easily add a printer to your computer. These utilities can also configure additional Print Server settings. Please refer to the user’s manual for more information.
PS SOFTWARE INSTALLATION After clicking Install PS Software the following screen will appear. Click Next To change the default installation location, click Browse. Click Next In this screen you can change the name of the installation folder. The default name is PS Software.
PS SOFTWARE INSTALLATION To finish the installation of the PS Software, click Finish. Click Finish To access the utilities, click Start > Programs > PS Software and select the utility you wish to use.
Technical Support You can find software updates and user documentation on the D-Link website. Tech Support for customers in Australia: Tel: 1300-766-868 24/7(24Hrs, 7days a week) technical support http://www.dlink.com.au e-mail: support@dlink.com.au India: Tel: 1800-222-002 9.00 AM to 9.00 PM. All days http://www.dlink.co.in/support/productsupport.
