User`s guide

12.2.1. Download configuration
The DPH80 system must be configured with the system IP address and filename of the
new configuration parameters. This can be done using the web interface, by logging in
to DPH80/General Configuration/TFTP Configuration.
The download file must be in a specific format understandable by the DPH80 system,
and it is very strongly recommended that this procedure be used to modify
configurations.
To change a configuration initially upload the configurations from DPH80 then change
the configurations in uploaded file, then download that modified configuration file.
TFTP server: This is the system where the tftp server is running, and where the
configurations are stored.
Configuration Download Filename: This is the name of the configuration file from
which configuration parameters will be downloaded. With out extension. DPH80 system
will automatically include the .txt extension while downloading.
Example: If the tftp server is running in the machine 10.47.60.252 and the download
filename is dnld (it should appear as dnld.txt in the tftp server PC), then the TFTP
Configuration fields should be entered as follows.
12.2.2. Download procedure
• Configure the DPH80 with the above-required parameters.
• Run the tftp server on the PC (Ex: 10.47.60.252 as above), from where you want to
download the configurations.
• Initiate the configuration download by clicking on the Configuration Download link
in the main page, followed by a click on Yes link in warning page to confirm
downloading.
• On successful download the DPH80 system will reboot with the new downloaded
configuration.
66