User`s guide

12. Configuration Upload and Download
This document aims at helping the user to upload and download configuration
parameters from DPH80 system.
12.1. Configuration Upload
This feature of DPH80 uploads current system configuration and stores it in a
configured PC. This feature is implemented using the standard tftp application.
12.1.1. Upload configuration
The DPH80 system must be configured with the system IP address of the upload
destination and the filename in which parameters will be stored. This can be configured
using the web interface. For this configuration Login to DPH80/General
Configuration/TFTP Configuration.
TFTP server: This is the system where the tftp server is running, and where the
configurations will be stored.
Configuration Upload Filename: This is the name of the uploaded configuration file,
without the extension. The DPH80 system will automatically include the .txt extension
while uploading.
Example: if the tftp server is running at the address 10.47.60.252, and the upload
filename is upld, then the TFTP Configuration fields would be entered as follows.
12.1.2. Upload procedure
• Configure the DPH80 with the above required parameters.
• Run the tftp server on the PC (Ex: 10.47.60.252 as above) where you want to upload
the configuration.
• Initiate the configuration upload by clicking on the Configuration Upload link in the
main page.
• Now you can see the configuration (Ex: upld.txt as above) file in the PC with the
current DPH80 system configuration.
12.2. Configuration Download
Use the following procedure to download a new system configuration from the
configured PC, again using the standard tftp application.
65