User`s guide

10.3.10. Logout
When clicked, the You have been successfully logged out page is displayed and the
current configuration session is terminated.
Note: This page may also be displayed if you provided the wrong username and/or
password or if your session has been inactive for more than 10 minutes. If you are
having an active session with the server, any other user accessing the H.323 phone's
configuration will get the Server Busy page and will not be allowed access.
10.4. Using the H.323 Phone
If the H.323 phone is configured properly and if the support infrastructure is there, the
H.323 phone will play dial tone on off-hook. You can dial any registered H.323 number
by entering the number followed by ‘#’ (‘#’ signals end of dialing to H.323 phone).
D-Link H.323 phone works in 10, 100, and 10/100 Mbps Ethernet environment. It has
an adjustable handset and speaker volume control and it plays a tone for all numerical
keys.
10.4.1. LEDs
• Link/Activity: Steady on for link up, flashing for activity, off for link down
• Speaker LED (Red): indicates speaker on status
• Hold (Green): Steady on to indicate Hold status; off means normal
• Mute (Red): Steady on to indicate Mute status; off means normal
10.4.2. Tones
D-Link H.323 phone plays the following tones depending on the phone’s current state.
The DPH-80 supports different type of tones for different countries – selected through
configuration.
58