User`s guide

8.2.12. Logout
When clicked, the You have been successfully logged out page is displayed and the
current configuration session is terminated.
Note: This page may also be displayed if you provided the wrong username and/or
password or if your session has been inactive for more than 10 minutes. If you are
having an active session with the server, any other user accessing the MGCP phone's
configuration will get the Server Busy page and will not be allowed access.
8.3. Using the MGCP Phone
If the MGCP phone is configured properly and if the support infrastructure is in place,
the MGCP phone will play the dial tone on off-hook. You can dial any registered MGCP
number by entering the number in sequence; the end of the number will be
automatically detected by using the following two methods:
Using “Digit map” algorithm with the digit map supplied by Call Agent.
Inter digit time out (2 seconds).
8.3.1. MGCP Phone Features
D-Link DPH-80 works in 10, 100, and 10/100 Mbps Ethernet environment. It has an
adjustable handset and speaker volume control and it plays tone for all numerical key
press.
LEDs
• Link/Activity: Steady on for link up, flashing for activity, off for link down
• Speaker LED (Red): indicates speaker-on status
• Hold (Green): Steady on to indicate Hold status; off means normal
• Mute (Red): Steady on to indicate Mute status; off means normal
8.3.2. Tones
The DPH-80 MGCP phone plays the following tones depending on the phone’s current
state. It supports different type of tones for different countries (selected through
configuration).
• Dial tone
26