User`s guide
Table Of Contents
- Overview
- Unpacking and Installation
- Getting Started
- Internet Phone Calls
- PSTN Phone Calls
- DPH-70 Configuration
- Additional Features
- Appendix A: Procedure for entering alphanumeric and special
- Appendix B: Troubleshooting
- All outgoing calls are PSTN calls. It does not dial in Inter
- “Please configure the phone and try again”
- “Please check the phone line and try again”
- “Password entered is incorrect. Try again”
- “The ISP line is busy, please call after some time”
- “The ISP server is not responding”
- “ISP connection could not be established, try later”
- “Please check your ISP parameters and try again”
- “Bad phone line, Please contact customer support”
- “Please check your calling card parameters and try again”
- “The number you have dialed is not locatable, please check t
- “The number you have called is busy, please call after some
- “Incorrect value. Press ‘1’ to edit, ‘2’ to skip”
- Fast error tone for a short period while disconnection phone
- All outgoing calls are PSTN calls. It does not dial in Inter
- Appendix C: DPH-70 Product Specifications
DPH-70 User’s Guide
6.2 Calling Card Parameters
The following information is required for DPH-70 to make and receive Internet phone calls. The
user will get this information from the VoIP (Internet Telephone) service provider. Please note that
DPH-70 will not work before configuring this information.
Calling Card User ID
This is the Internet phone number or user ID assigned to you. It can have a maximum of 30
characters. This information is required to verify the calling card user identity to the VoIP (Internet
Telephone) Service Provider.
Calling Card Password
This information is required to verify the calling card user identity to the VoIP (Internet Telephone)
Service Provider. It can have a maximum of 30 characters.
VoIP Server Address
This is the IP address where VoIP (Internet Telephone) Server is running. It can be a valid IP
address like 198.62.73.101 or a valid domain name like sip.dlink.com. The domain name can
have a maximum of 30 characters, including ‘dots’. Default server address is sip.cityonlines.com.
VoIP server address is of the form xxx.xxx.xxx.xxx where xxx is between 0 and 255. If the
entered number is invalid, phone prompts with a message “ The parameter you have entered is
incorrect, Press ‘1’ to edit, ‘2’ to skip”.
Calling Card configuration Password
This is the password for accessing and configuring the calling card information. It can have
maximum of 30 characters. Default is “abcd”. The user is advised to change this value. If you
forget this password, reset the phone to factory values and configure the phone again.
6.3 Review Configuration
This option plays current information for all parameters in main menu as
“ISP Phone number is xxxx,
ISP User name is xxxx,
ISP Password is xxxx,
Calling Card user ID is xxxx,
Calling Card password is xxxx”
After playing this message, it prompts with the main menu.
6.4 Save and Exit
This option saves all the information entered in the configuration and exits from configuration
option. You can leave the configuration without saving the information by replacing the handset or
switching the speaker off.
17