User`s guide

Table Of Contents
DPH-70 User’s Guide
6 DPH-70 Configuration
DPH-70 voice menu helps you through the configuration process. You can enter the configuration
menu by pressing the key sequence ‘123’ and terminate with a hash (#) key when DPH-70 is in
idle state.
DPH-70 will ask for password on entering configuration menu. Since the configuration information
contains valuable information it is password protected. If you don’t remember your password, you
can reset DPH-70 to default password as described in Loading factory defaults. The default
password is ‘12345’.
Warning: DPH-70 identifies end of a parameter by ‘#’. Please terminate each parameter entry
into DPH-70 by pressing ‘#’ key.
Configuration: Main Menu
1. ISP Parameters
2. Calling card
Parameters
4. Review
Configuration
5. Save and Quit
Phone Number
User Name
Password
User ID
Password
VoIP server address
Calling card configuration
password
Internet access phone number
ISP User Name
ISP Password
Calling card User ID
Calling card Password
1. Configuration
Password
2. Software Server
Address
3. Country Code
7. Volume Control
6. Software Version
3. Extended Menu
9. Exit to Main Menu
Configuration password
Software server
address
Country code
Language
VoIP service provider
Software version
Volume level
4. Language
8. Review
Configuration
5. Service Provider
DPH-70 configuration menu is shown above. It has five options in the main menu and seven
options in the extended menu. Each of them is described below. The configurable parameters are
shown in bold letters. DPH-70 plays the current value of each parameter and allows you to edit
or skip to next parameter. After entering a parameters value, it plays it back for verification.
After password verification, DPH-70 will play the main menu as below.
“Press
‘1’ to enter ISP parameters,
‘2’ to enter calling card parameters,
‘3’ to enter extended menu,
15