Installation guide

88
6.1.3 Configuration management
Tap "Settings", and then select "Configuration management" to switch to
Configuration management interface.
Configuration item Meaning
Auto provision
Server: Input the upgrade server address.
Protocol: Select the protocol used by the automatic
upgrade, Include: FTP, HTTP, HTTPS and TFTP.
User: Input the upgrade server account. (Note: It is
only used when using the FTP or HTTPS protocol.)
Password: Input the upgrade server password. (Note:
It is only used when using the FTP protocol.)
File name: Input the filename needed to be upgraded.
Time interval (): Input automatic update interval.
Mode: select the upgrade modes:"Disable", "After
reboot", "Time interval".
Upgrade now: Manual to upgrade.
TR-069
Server: Input the server address of TR069, in TR069
interface press any DTMF button can pop up an input
box of entering the server address.
Change Password: When you have certification, you
can change the password.
Account: Input the account that used in registering
TR069 server.
Password: Input the password that used in registering
TR069 server.
Auto login: Enable/Disable. After enabling, it will use
the saved user name and password after the phone
reboot and do not need to manually input.
Local Serial Number: Display the local serial
number of TR069.
Attach:
You must make a version file, that is version. txt , before automatic upgrade the
applications, as follows:
Version: 1.0.837.35.64
Server: 192.168.1.249
Image: home.tar.gz
Protocol: ftp
User: ad
Password: ad
Version: Phone version, this version can be arbitrarily input. But the version
number cannot be same with the telephone version number, otherwise it will