User`s guide

DPH-70 User’s Guide
17
6.4 Save and Exit
This option saves all the information entered in the configuration and exits from the configuration
option. You can leave the configuration without saving the information by replacing the handset or
switching the speaker off.
6.5 Extended Menu
6.5.1 Configuration Password
Internet access and calling card parameters are valuable information and can be misused. To
protect against this, the DPH-70’s configuration module is password-protected. It can have
maximum of 30 characters. Default is "12345". The user is strongly advised to change this value.
If you forget this password, reset the phone to factory values and configure the phone again.
6.5.2 Software server address
The latest DPH-70 software can be downloaded from this address. The address can be a valid IP
address like 198.62.73.101 or a valid domain name like dph70.cityonlines.com. The domain
name can have maximum of 30 characters, including ‘dots’. Default server address is
dph70.cityonlines.com (or 202.62.83.106).
6.5.3 Country Code
Following is a list of countries supported with their respective codes
Table 1 Country Codes
Country Code
Brazil 0
China 1
India 2
Korea 3
Malaysia 4
Mexico 5
South Africa 6
Taiwan 7
USA 8
Others (India) 9
If you enter a value other than those listed, the phone prompts with a message “The parameter
you have entered is incorrect, Press ‘1’ to edit, ‘2’ to skip.” Choose appropriately.
Based on the country code selection, the various tones and modem software will vary. Default
country code is 2 (India). If you change it to some other country than yours, the phone may not be
able to make calls and you will hear some error messages. So please be sure to select the
correct country code.
6.5.4 Language Support
The DPH-70 can play voice prompts in many languages. Following is the list of languages
supported with their respective codes.