Specifications

21
Configuration
Configuring the Phone Using a Web Browser
Reset Page
This is the IP phone reset system web page. You can reset the IP phone
device through the web browser by clicking the “Reset” button.
After power is applied, the LCD panel will display the time on the first line and
the phone’s name on the second line. To configure the phone, press the Function
button, enter the password if one is set, and then press the Enter key. (The
default password is Null <Empty>.) After successful password authentication,
menu names will be displayed on the LCD panel, and you can step through
them by pressing Review Tor S. Press the Enter button to access the named
menu and modify the settings in it; press the ESC button to exit any menu but
the main menu. The Function menu is hierarchical and similar to the Web page
configuration, as shown below.
Configuring the Phone Using the Keypad
and LCD