Specifications

38
1. Turn on or reboot the DPG-2000W.
2. During the boot-up screen, wait for a “Reset to factory default” timer
starts message to appear.
Tap on the hardware reset button or power cycle to reboot the
DPG-2000W before the timer ends (10 seconds), and the DPG-2000W
will revert back to factory default settings.
4. During the next boot-up screen, a Reset to Factory Default message
should appear next to the Timer message, indicating a successful
hardware reset.
Reset to Factory Defaults
The hardware reset button is located at the back of the DPG-2000W. You can
use a bent paper clip to access the hardware reset button. The main function
of the hardware-reset button is to reboot the DPG-2000W. To reboot the
DPG-2000W, only a light tap on the reset button is required.
Warning
Please note that resetting the DPG-2000W to its factory default settings
will erase all configurations and encryption information you may have set
through the web interface.
To reset the DPG-2000W back to the factory default settings, follow the
steps below:
Push Reset