Specifications

23
Web-Based Administration Utility
Introduction to the Web-Based Administration Utility
Along with the software-based PSM available on the install CD, the DPG-2000W
also has a Web-Based Utility that allows you to configure other aspects of the
DPG-2000W, such as:
WARNING
Do not power off or disconnect the DPG-2000W unit while modifying
DPG-2000W settings. Doing so may damage the equipment. The
Web-based utility will automatically reboot the DPG-2000W if necessary.
Accessing the Web-Based Administration Utility
Be sure that your wireless adapter is connected to the DPG-2000W before
running the administration utility. Please refer to the section titled Using the
DPG-2000W > Using Your Wireless Configuration Utility on pg. 14 for more
information.

Change the banner page

Change the wireless security/encryption settings of the DPG-2000W

Upgrade the DPG-2000W firmware
To access the web-based Administration Utility:
Go to: Start > Programs > D-Link
Air Plus G DPG-2000W Utility >
Administration to launch the
Administration Utility.